Corident Corimplant Trays

Description

CORIMPLANT TRAY is fine quality aluminum impression trays specially designed to make impressions stronger and secure.

Aluminum is light in weight thus making it easier for Implantologists.

It is harmless to humans since made of aluminum and possible to disinfect in the high temperature.

COMPOSITION : 

• Made up of biocompatible aluminum.

ADVANTAGES : 

• Convenience to use.
• Safety.
• Fit strong and secure.
• High Precision.
• It can prevent secondary infection thanks to auto-crave disinfection.
• It can reduce chair time for patients.
• More economical than individual tray and disposable tray.
• Corimplant Tray bottom is made of transparent plastic material that is disposable and changed.
• Convenient to get the impression without making individual tray since the plastic part can be detached from the implant screw.
• It is possible to separate the Tray bottom by parts and make a hole exactly on the screw zone since the screw zone can be check during getting the impression.

Key Features

Specifications

• Product Type: Implant Impression Tray
• Category: Prosthodontic Impression Accessory
• Material: Biocompatible Aluminum
• Design: Detachable Tray Bottom Design
• Sterilization Compatibility: High Temperature Autoclavable Disinfection
• Construction: Solid Aluminum Body
• Precision Feature: Screw Zone Visibility for Accurate Hole Positioning
• Safety Feature: Helps Prevent Secondary Infection
• Handling Property: Lightweight for Easy Clinical Handling
• Usage Benefit: Reduces Chair Time During Impression Procedures
• Tray Function: Strong and Secure Impression Support

Packaging

1 Complete Set of Implant Trays:

• 2 Medium (U/L)
• 2 Large (U/L)

1 Complete Set of Segmented Clear Plastic Covers (210 units):

• 105 Units x Medium (M1-M7) x 15 sets each
• 105 Units x Large (L1-L7) x 15 sets each

Directions for Use

7 Pieces of Plastic covers are used for a tray.

STEP 1: Before Impression condition of Implant patient

STEP 2: With screws in the mouth before Implant Impression

STEP 3: Insert transparent cover on the tray. Insert the cover avoiding the part to get the impression

STEP 4: Try to put on the tray in the mouth. Check the location of tray cover part and screw part and check if the screw protrudes out.

STEP 5: It is ok to detach the Screw part Cover and make a hole on the screw zone

STEP 6:  Get the impression of Putty Type.

STEP 7:  Insert the cover from the inner side of the tray

STEP 8: Widen the gap between the cover using a detaching tool and detach the cover. It is easier to detach the cover if you close up the try slightly with your hand.

STEP 9: Put the Putty Type impression material in the tray

STEP 10: Cover the Putty with plastic wrap

STEP 11: Get the impression of Putty and let the screw part be protruded.

STEP 12: Mix the Injection Type and put it on the Putty impression.

STEP 13:  Spread the mixed Injection Type on the part to get the impression in the mouth.

STEP 14: 

Get the impression of inside the mouth. Get the impression fixing the screw part is exactly outside.

STEP 15: Unscrew after the impression material becomes hard.

STEP 16: Remove the tray out of the mouth with care.

STEP 17: Bottom side of the removed tray.

STEP 18: Insert the Lab Analog in the Impression and fasten the screw

STEP 19: Pour the gypsum on the Tray. 

STEP 20: Pour the gypsum to cover the Lab Analog enough as bulging. 

STEP 21:  Unscrew and detach the gypsum model after the gypsum is hardened.

STEP 22: Completed Impression model 

Impression is taken

Additional Information

Country of Origin: South Korea

Manufacturer:
Corident
83 Road, No. 9 Waryong-ro, Seo-gu, Daegu, South Korea

Packer:
Corident
83 Road, No. 9 Waryong-ro, Seo-gu, Daegu, South Korea

Imported & Marketed By:
VASA Denticity Limited
Khasra No. 15/1, Mustil No. 6, Village Dabodha, Farrukhnagar, Gurugram, Haryana – 122506, India
Phone: +91 72899 99456

Warranty & Service

• This product does not carry any manufacturer/importer warranty