Bionova Biological Indicator – ETO Rapid Sterilization (Pack of 50) (Short Expiry 01-2027)

Description

Key Features

• Effective Monitoring: Validates steam, ETO, and plasma sterilization processes.
• High Spore Concentration: Contains 10⁵ or 10⁶ Geobacillus stearothermophilus spores per vial.
• Wide Temperature Range: Suitable for steam sterilization at 121-135°C.
• Quick Readout: Provides results within 24 hours of incubation.
• Color Indicator: Shows a purple-to-yellow color change to indicate sterilization efficacy.
• Positive Control Requirement: Ensures accurate results by using a non-sterilized control indicator.

Specifications

• Spore Concentration: 10⁵ or 10⁶ spores per vial
• Sterilization Processes: Steam, ETO, Plasma
• Steam Sterilization Temperature: 121-135°C
• Incubation Temperature: 55-62°C
• Incubation Time: 24 hours, with 10-hour readouts

Packaging

Bionova Biological Indicators For Sterilization

• 1 x Biological Indicator – Steam Sterilization (Pack of 100)

Bionova Biological Indicators For Sterilization

• 1 x Biological Indicator – ETO Sterilization (Pack of 100)

Bionova Biological Indicators For Sterilization

• 1 x Biological Indicator – Plasma Sterilization (Pack of 100)

Bionova Biological Indicators For Sterilization

• 1 x Biological Indicator – Steam Rapid Sterilization (Pack of 50)

Bionova Biological Indicators For Sterilization

• 1 x Biological Indicator – ETO Rapid Sterilization (Pack of 50)

Bionova Biological Indicators For Sterilization

• 1 x Biological Indicator – Plasma Rapid Sterilization (Pack of 50)

Directions for Use

• Label the Indicator: Write the sterilizer number, load number, and processing date on the biological indicator.
• Place in Sterilizer: Pack the indicator with materials to be sterilized. Place it in areas considered most difficult for the sterilizing agent (e.g., center of the load or near the door).
• Run Sterilization: Proceed with the sterilization cycle as usual.
• Remove After Sterilization: After the process finishes, open the sterilizer door, wait for 5 minutes, and carefully remove the biological indicator. Use safety glasses and gloves to avoid injury from a potential ampoule burst.
• Check Chemical Indicator: Ensure the chemical indicator on the label changes color to confirm steam exposure. Note: This does not confirm sterility.
• Crush the Ampoule: Use an ampoule crusher to crush the ampoule inside the indicator. Shake the tube vigorously to mix the medium with the spore carrier.
• Incubate: Place the biological indicator in the incubator at 55-62°C. Incubate for up to 24 hours, checking for color changes every 10 hours.
• Read Results: A color change from purple to yellow indicates sterilization failure. No color change after 24 hours means successful sterilization.
• Positive Control: Run a non-sterilized positive control with each cycle to ensure accurate incubation conditions.

Additional Information

Country of Origin: Argentina

Manufacturer:
Terragene S.A.
Ruta Nacional N° 9 Km 280, CP 2130, Parque Industrial Micropi, Alvear, Santa Fe, Argentina

Importer:
Bionova Research Labs Pvt. Ltd. / Bionova Lifesciences
55 and 56, Bikasipura Main Road, Yelachenahalli, Bangalore – 560062, Karnataka, India
Phone: +91 72899 99456

Marketed By:
Bionova Research Labs Pvt. Ltd. / Bionova Lifesciences
55 and 56, Bikasipura Main Road, Yelachenahalli, Bangalore – 560062, Karnataka, India
Phone: +91 72899 99456

Warranty & Service

• Warranty is not applicable for this product